Southeast Non-Ferrous Alloys®
 | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Quotes 0 Items
SENFA® > Continuous Cast Solid Bars > C95400 Aluminum Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C95400 Aluminum Bronze Bars

Check up to five results to perform an action.

C95400 Aluminum Bronze is a non-lead “GREEN” Alloy
Aluminum Bronze
CDA 954
9C
ASTM B505


Aluminum bronze is a very hard, strong, abrasion resistant bronze whose physical properties remain good at elevated temperatures – compressive strength at 500°F is the same as that of tin bronzes at room temperature. Good applications include heavy earth moving equipment, roll neck bearings, and machine tool bearings.

Solid and cored bars are stocked in 13" increments and 144" lengths, and are available in other lengths and non-standard sizes. Solid and cored bars over 8" O.D. are stocked in 105" lengths. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

C95400 is available in either as cast condition or heat-treated.

Typical Properties: (Not to be used for specification purposes.)
Copper: 83.00% min.
Aluminum: 10.00 – 11.50%
Iron 3.00: – 5.00%

Physical Properties: Continuous Cast
As Cast
Tensile Strength, PSI: 85,000 min.
Yield Strength, PSI: 32,000 min.
Elongation: 12% min.

Heat Treated
Tensile Strength, PSI: 95,000 min.
Yield Strength, PSI: 45,000 min.
Elongation: 10% min.
Brinell Hardness (3000 kg load; As Cast): 170
Brinell Hardness (3000 kg load; Heat Treated): 195
Machinability Rating: 60
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 750°F intermittent to 1200°F

C95400 Aluminum bronze is used for low speed, and very high load bearing applications. C95400 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 1 - 25 of 30 1 2 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

O.D. Min

O.D. Max

B954S000004 Yes SOLID 1/2 in 0.5550 in 0.5750 in
B954S000006 Yes SOLID 3/4 in 0.8050 in 0.8250 in
B954S000008 Yes SOLID 1 in 1.0550 in 1.0750 in
B954S000010 Yes SOLID 1 1/4 in 1.3050 in 1.3250 in
B954S000012 Yes SOLID 1 1/2 in 1.5550 in 1.5750 in
B954S000013 Yes SOLID 1 5/8 in 1.6800 in 1.7000 in
B954S000014 Yes SOLID 1 3/4 in 1.8050 in 1.8250 in
B954S000016 Yes SOLID 2 in 2.0550 in 2.0750 in
B954S000018 Yes SOLID 2 1/4 in 2.3050 in 2.3250 in
B954S000020 Yes SOLID 2 1/2 in 2.5550 in 2.5750 in
B954S000022 Yes SOLID 2 3/4 in 2.8050 in 2.8250 in
B954S000024 Yes SOLID 3 in 3.0550 in 3.0750 in
B954S000026 Yes SOLID 3 1/4 in 3.3250 in 3.3550 in
B954S000028 Yes SOLID 3 1/2 in 3.5750 in 3.6050 in
B954S000030 Yes SOLID 3 3/4 in 3.8250 in 3.8550 in
B954S000032 Yes SOLID 4 in 4.0750 in 4.1050 in
B954S000034 Yes SOLID 4 1/4 in 4.3250 in 4.3550 in
B954S000036 Yes SOLID 4 1/2 in 4.5750 in 4.6050 in
B954S000040 Yes SOLID 5 in 5.1050 in 5.1450 in
B954S000042 Yes SOLID 5 1/4 in 5.3550 in 5.3950 in
B954S000044 Yes SOLID 5 1/2 in 5.6050 in 5.6450 in
B954S000046 No SOLID 5 3/4 in 5.8550 in 5.8950 in
B954S000048 Yes SOLID 6 in 6.1050 in 6.1450 in
B954S000050 No SOLID 6 1/4 in 6.3500 in 6.4000 in
B954S000052 Yes SOLID 6 1/2 in 6.6000 in 6.6500 in
  Results 1 - 25 of 30 1 2 
Privacy Policy|Sitemap|Catalog IndexCopyright © 2019 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform