Southeast Non-Ferrous Alloys®
 | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Quotes 0 Items
SENFA® > Centrifugal Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B271


Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 14,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




   
  Results 1 - 25 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

I.D. Min

I.D. Max

O.D. Min

O.D. Max

B932F040072 Yes 5 in 9 in 4.8600 in 4.8900 in 9.1100 in 9.1400 in
B932F040080 Yes 5 in 10 in 4.8600 in 4.8900 in 10.1100 in 10.1400 in
B932F040084 Yes 5 in 10 1/2 in 4.8600 in 4.8900 in 10.6100 in 10.6400 in
B932F040088 Yes 5 in 11 in 4.8600 in 4.8900 in 11.1100 in 11.1400 in
B932F040092 Yes 5 in 11 1/2 in 4.8600 in 4.8900 in 11.6100 in 11.6400 in
B932F040096 Yes 5 in 12 in 4.8600 in 4.8900 in 12.1100 in 12.1400 in
B932F040100 Yes 5 in 12 1/2 in 4.8600 in 4.8900 in 12.6100 in 12.6400 in
B932F044080 Yes 5 1/2 in 10 in 5.3600 in 5.3900 in 10.1100 in 10.1400 in
B932F044084 Yes 5 1/2 in 10 1/2 in 5.3600 in 5.3900 in 10.6100 in 10.6400 in
B932F044088 Yes 5 1/2 in 11 in 5.3600 in 5.3900 in 11.1100 in 11.1400 in
B932F044092 Yes 5 1/2 in 11 1/2 in 5.3600 in 5.3900 in 11.6100 in 11.6400 in
B932F044096 Yes 5 1/2 in 12 in 5.3600 in 5.3900 in 12.1100 in 12.1400 in
B932F044100 Yes 5 1/2 in 12 1/2 in 5.3600 in 5.3900 in 12.6100 in 12.6400 in
B932F048068 Yes 6 in 8 1/2 in 5.8600 in 5.8900 in 8.6100 in 8.6400 in
B932F048072 Yes 6 in 9 in 5.8600 in 5.8900 in 9.1100 in 9.1400 in
B932F048080 Yes 6 in 10 in 5.8600 in 5.8900 in 10.1100 in 10.1400 in
B932F048084 Yes 6 in 10 1/2 in 5.8600 in 5.8900 in 10.6100 in 10.6400 in
B932F048088 Yes 6 in 11 in 5.8600 in 5.8900 in 11.1100 in 11.1400 in
B932F048092 Yes 6 in 11 1/2 in 5.8600 in 5.8900 in 11.6100 in 11.6400 in
B932F048096 Yes 6 in 12 in 5.8600 in 5.8900 in 12.1100 in 12.1400 in
B932F048100 Yes 6 in 12 1/2 in 5.8600 in 5.8900 in 12.6100 in 12.6400 in
B932F048104 Yes 6 in 13 in 5.8600 in 5.8900 in 13.1100 in 13.1400 in
B932F048112 Yes 6 in 14 in 5.8600 in 5.8900 in 14.1100 in 14.1400 in
B932F052068 Yes 6 1/2 in 8 1/2 in 6.3600 in 6.3900 in 8.6100 in 8.6400 in
B932F052076 Yes 6 1/2 in 9 1/2 in 6.3600 in 6.3900 in 9.6100 in 9.6400 in
  Results 1 - 25 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2019 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform