Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B271

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 14,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 101 - 125 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

Sort by

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B932F100108 Yes 12 1/2 in 13 1/2 in 12.3600 in 12.3900 in 13.6100 in 13.6400 in
B932F080108 Yes 10 in 13 1/2 in 9.8600 in 9.8900 in 13.6100 in 13.6400 in
B932F076108 Yes 9 1/2 in 13 1/2 in 9.3600 in 9.3900 in 13.6100 in 13.6400 in
B932F088108 Yes 11 in 13 1/2 in 10.8600 in 10.8900 in 13.6100 in 13.6400 in
B932F092108 Yes 11 1/2 in 13 1/2 in 11.3600 in 11.3900 in 13.6100 in 13.6400 in
B932F084108 Yes 10 1/2 in 13 1/2 in 10.3600 in 10.3900 in 13.6100 in 13.6400 in
B932F084112 Yes 10 1/2 in 14 in 10.3600 in 10.3900 in 14.1100 in 14.1400 in
B932F092112 Yes 11 1/2 in 14 in 11.3600 in 11.3900 in 14.1100 in 14.1400 in
B932F088112 Yes 11 in 14 in 10.8600 in 10.8900 in 14.1100 in 14.1400 in
B932F076112 Yes 9 1/2 in 14 in 9.3600 in 9.3900 in 14.1100 in 14.1400 in
B932F080112 Yes 10 in 14 in 9.8600 in 9.8900 in 14.1100 in 14.1400 in
B932F100112 Yes 12 1/2 in 14 in 12.3600 in 12.3900 in 14.1100 in 14.1400 in
B932F104112 Yes 13 in 14 in 12.8600 in 12.8900 in 14.1100 in 14.1400 in
B932F096112 Yes 12 in 14 in 11.8600 in 11.8900 in 14.1100 in 14.1400 in
B932F068112 Yes 8 1/2 in 14 in 8.3600 in 8.3900 in 14.1100 in 14.1400 in
B932F072112 Yes 9 in 14 in 8.8600 in 8.8900 in 14.1100 in 14.1400 in
B932F064112 Yes 8 in 14 in 7.8600 in 7.8900 in 14.1100 in 14.1400 in
B932F048112 Yes 6 in 14 in 5.8600 in 5.8900 in 14.1100 in 14.1400 in
B932F056112 Yes 7 in 14 in 6.8600 in 6.8900 in 14.1100 in 14.1400 in
B932F096116 Yes 12 in 14 1/2 in 11.8600 in 11.8900 in 14.6100 in 14.6400 in
B932F104116 Yes 13 in 14 1/2 in 12.8600 in 12.8900 in 14.6100 in 14.6400 in
B932F100116 Yes 12 1/2 in 14 1/2 in 12.3600 in 12.3900 in 14.6100 in 14.6400 in
B932F108116 Yes 13 1/2 in 14 1/2 in 13.3600 in 13.3900 in 14.6100 in 14.6400 in
B932F088116 Yes 11 in 14 1/2 in 10.8600 in 10.8900 in 14.6100 in 14.6400 in
B932F092116 Yes 11 1/2 in 14 1/2 in 11.3600 in 11.3900 in 14.6100 in 14.6400 in
  Results 101 - 125 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform