Southeast Non-Ferrous Alloys®
SENFA® > Centrifugal Cast Cored Bars > C93200 (SAE 660) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C93200 (SAE 660) Bronze Bars

 
Check up to five results to perform an action.

High-Leaded Tin Bronze
CDA 932
SAE 660
83-7-7-3
ASTM B271

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Centrifugal cast large diameter cored bars are also available in 13" lengths as well as made to order sizes and lengths.

Typical Properties: (Not to be used for specification purposes.)
Copper: 81.00 – 85.00%
Tin: 6.25 – 7.50%
Lead: 6.00 – 8.00%
Zinc: 2.00 – 4.00%

Physical Properties: Centrifugal Cast
Tensile Strength, PSI: 30,000 min.
Yield Strength, PSI: 14,000 min.
Elongation: 15% min.
Brinell Hardness (500 kg load): 65 typical
Machinability Rating: 70
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 500°F

C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



   
  Results 26 - 50 of 192  1 2 3 4 5 »  

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

Sort by

I.D. Min

I.D. Max

O.D. Min

O.D. Max
B932F056084 Yes 7 in 10 1/2 in 6.8600 in 6.8900 in 10.6100 in 10.6400 in
B932F052084 Yes 6 1/2 in 10 1/2 in 6.3600 in 6.3900 in 10.6100 in 10.6400 in
B932F064084 Yes 8 in 10 1/2 in 7.8600 in 7.8900 in 10.6100 in 10.6400 in
B932F060084 Yes 7 1/2 in 10 1/2 in 7.3600 in 7.3900 in 10.6100 in 10.6400 in
B932F072084 Yes 9 in 10 1/2 in 8.8600 in 8.8900 in 10.6100 in 10.6400 in
B932F068084 Yes 8 1/2 in 10 1/2 in 8.3600 in 8.3900 in 10.6100 in 10.6400 in
B932F076084 Yes 9 1/2 in 10 1/2 in 9.3600 in 9.3900 in 10.6100 in 10.6400 in
B932F076088 Yes 9 1/2 in 11 in 9.3600 in 9.3900 in 11.1100 in 11.1400 in
B932F080088 Yes 10 in 11 in 9.8600 in 9.8900 in 11.1100 in 11.1400 in
B932F068088 Yes 8 1/2 in 11 in 8.3600 in 8.3900 in 11.1100 in 11.1400 in
B932F072088 Yes 9 in 11 in 8.8600 in 8.8900 in 11.1100 in 11.1400 in
B932F060088 Yes 7 1/2 in 11 in 7.3600 in 7.3900 in 11.1100 in 11.1400 in
B932F064088 Yes 8 in 11 in 7.8600 in 7.8900 in 11.1100 in 11.1400 in
B932F052088 Yes 6 1/2 in 11 in 6.3600 in 6.3900 in 11.1100 in 11.1400 in
B932F056088 Yes 7 in 11 in 6.8600 in 6.8900 in 11.1100 in 11.1400 in
B932F040088 Yes 5 in 11 in 4.8600 in 4.8900 in 11.1100 in 11.1400 in
B932F044088 Yes 5 1/2 in 11 in 5.3600 in 5.3900 in 11.1100 in 11.1400 in
B932F048088 Yes 6 in 11 in 5.8600 in 5.8900 in 11.1100 in 11.1400 in
B932F048092 Yes 6 in 11 1/2 in 5.8600 in 5.8900 in 11.6100 in 11.6400 in
B932F044092 Yes 5 1/2 in 11 1/2 in 5.3600 in 5.3900 in 11.6100 in 11.6400 in
B932F040092 Yes 5 in 11 1/2 in 4.8600 in 4.8900 in 11.6100 in 11.6400 in
B932F056092 Yes 7 in 11 1/2 in 6.8600 in 6.8900 in 11.6100 in 11.6400 in
B932F052092 Yes 6 1/2 in 11 1/2 in 6.3600 in 6.3900 in 11.6100 in 11.6400 in
B932F064092 Yes 8 in 11 1/2 in 7.8600 in 7.8900 in 11.6100 in 11.6400 in
B932F060092 Yes 7 1/2 in 11 1/2 in 7.3600 in 7.3900 in 11.6100 in 11.6400 in
  Results 26 - 50 of 192  1 2 3 4 5 »  
Privacy Policy|Sitemap|Catalog IndexCopyright © 2021 Southeast Non-Ferrous Alloys (SENFA)®, All Rights Reserved
Site created by Thomas Web Solutions and powred by Navigator Platform